The digital LED signage industry has a fairly specific set of terms and vocabulary for describing LED displays. Here is a quick guide to some of the most important terms to know LED display signs.

Table of Contents

1. Core LED Technology Fundamentals

What is an LED (Light Emitting Diode)?

A Light Emitting Diode (LED) is a solid-state semiconductor device that converts electrical energy directly into light.

What is solid-state lighting?

Lighting devices that do not contain moving parts or parts that can break, rupture, shatter, leak, or contaminate the environment. LEDs do not use electrical filaments or gasses to produce light.

2. Electrical Specifications

What is AC?

This is Alternating Current. This is the electricity that is used in most homes and commercial spaces. It’s often referred to as line voltage and number differs from country to country. US line voltage is typically 90V-220V, whereas it often averages higher in Europe.

Standard reference: European mains voltage is standardized at 220–240V 50Hz, while North America uses 120V 60Hz as the nominal line voltage for commercial and residential buildings.

What is DC?

This is Direct Current. Most LED strips on the market use low-voltage DC. A transformer or low-voltage battery is often required to step-down the AC voltage to a suitable level for the LED strips, which is normally 12V or 24V DC.

Industry guideline: 12V DC is most common for short strip runs under 5 meters, while 24V DC is the standard for installations 5–10 meters long to reduce voltage drop and brightness inconsistency across the run.

What is mA or mAmp?

This is 1/1000 or 0.001 of 1 ampere. When using LED strips it is common that the current draw for the LEDs will be less than one amp. In this case milliamps are used to indicate the amp draw. An example of this would be that a draw of 0.5 amp would be equal to 500mA.

What is a Watt?

A watt is equivalent to one joule per second, corresponding to the power in an electric circuit in which the potential difference is one volt and the current one ampere. A watt is equal to the voltage multiplied by the amperage. This is how your electric company keeps track of how much energy you consume.

What is luminous efficacy?

This is calculated by measuring the lumen output and then dividing that number by watts. For example, a strip that has a lumen output of 300lm/ft and a wattage draw of 3w/ft has an efficiency of 100lm/W.

2025 industry benchmark: Standard commercial LED strips deliver 100–140 lm/W, while premium high-efficiency models reach 160–190 lm/W. Efficacy is the primary metric for calculating long-term energy cost savings for signage installations.

3. LED Chip & Strip Design Specifications

What is the difference between 3528 LEDs v 5050 LEDs?

Not all LED chips are equal. The four digits represent the size of the chips in millimeters. For example, the 3528 chip is 3.5 mm X 2.8mm. Some chips are brighter than others and some have special uses and restrictions.

Standard industry reference: 5050 LED chips measure 5.0mm x 5.0mm. A typical 3528 chip produces 6–9 lumens per chip, while a 5050 chip delivers 18–22 lumens per chip. 5050 LEDs are preferred for high-brightness signage and task lighting, while 3528 LEDs are used for low-wattage accent and backlighting applications.

What is LED pitch and how does it affect the type of lighting I wish to achieve?

LED pitch is the distance between the individual chips on a strip (FPCB). It is absolutely crucial to understand the importance that pitch plays in your project. The shorter the pitch, the more uniform the light tends to be and the less spotting you have. To read and learn more about LED pitch.

What is Binning?

Simply put, binning is the process of grouping LEDs during production so that they are matched with LEDs of the same color sector. For example, all 2700K chips are ‘binned’ together and are separated from chips that have a higher/lower color temperature.

4. Color Quality & Light Output Metrics

What are lumens?

Lumen is the measurement of brightness as perceived to the human eye. Because of incandescent lighting, we are all accustomed to using watts to measure the brightness of light. Today, we use lumen. Lumen is the most important variable when choosing which LED strip light you need to look at. Make sure you compare lumen output between LED strip lights before determining which one is best for your project.

What is color temperature?

The color of light can be quantified by referring to its color temperature. White light is measured in Kelvins (K). Most white lights fall in a spectrum between 1800K and 6500K. When getting close to 3000K, the light is noticeably warmer. On the other end of the spectrum, the lights have a blue-ish tint and cooler tone when nearing 6500K.

Common application benchmarks:

  • 2700K: Warm white, standard for residential and hospitality spaces
  • 3000K: Soft white, common in retail and commercial interiors
  • 4000K: Neutral white, used in offices and indoor commercial signage
  • 5000K–6500K: Cool white / daylight, standard for outdoor LED displays and high-visibility signage

What is CRI and why is it important?

Color Rendering Index (CRI) is the measurement of how colors look under a light source when compared with sunlight. Having information on the CRI of a LED strip light is important because you want to make sure that the colors are being accurately represented by the light source. CRI is measured on a scale from 0-100. A CRI of 80+ is the industry-standard for most applications while a CRI of 90+ tends to be necessary for situations that need color accuracy. Our UltraBright High CRI Series are used for photography lighting, retail lighting, bathroom or salon lighting, and residential lighting.

Supplemental note: CRI 95+ is required for high-end retail apparel displays, art galleries and broadcast studio lighting. CRI is an older metric, largely replaced in professional specifications by the more accurate TM-30 standard.

What does Fidelity Index (TM-30) mean?

How closely the observed light can render colors like the sun, using 99 color samples.

What does Gamut Index (TM-30) mean?

How saturated or desaturated colors are (aka how intense the colors are).

What does Color vector Graphic (TM-30) mean?

Which colors are saturated/desaturated and whether there is a hue shift in any of the 16 color bins.

Context for TM-30: Developed by the Illuminating Engineering Society (IES) in 2015, TM-30 is the modern replacement for the CRI standard. It uses 99 real-world color samples (vs. 8 for CRI) to provide a far more accurate measurement of color rendering performance.

What does CQS – Color Quality Scale mean

An alternative to the unsaturated CRI measurement colors. There are 15 highly saturated colors that are used to compare chromatic discrimination, human preference, and color rendering.

5. Environmental Protection (IP) Ratings

What is IP stand for?

This is a rating system that defines the ability of a product to be able to work in different environments. IP is an acronym “Ingress Protection”. It is a measurement of the protection an item will have against solid objects (dust, sand, dirt, etc.) and liquids.

An IP rating is comprised of 2 numbers. The first number refers to the protection against solid objects (dust, etc) and the second number refers to protection against liquids. Here is a complete article about IP ratings.

What is the difference between IP65, IP67, & IP68?

The differences between commonly sold IP65, IP67, & IP68 strips are slight, but very important. Using the above chart as a guide, we can see that all strips are protected at the highest level from solids and dust. The variations come with the protection against liquids.

IP65 = Water resistant. “Protected against water jets from any angle” Do NOT submerge IP65 LED lights, these are not waterproof.
IP67 = Water resistant plus. “Protected against the events of temporary submersion (10 minutes)”Do NOT submerge IP67 LED lights for extended periods, these are not waterproof.
IP68 = Waterproof “Protected against the events of permanent submersion up to 3 meters”

Common IP rating application guide:

  • IP20: Indoor only, no dust protection, for dry commercial interiors
  • IP54: Dust protected, splash resistant, for covered outdoor areas
  • IP65: Standard for outdoor signage exposed to rain and sprinklers
  • IP67: Suitable for temporary outdoor installations with occasional submersion risk
  • IP68: Required for permanent underwater applications (pools, fountains, submerged signage)

Key clarification: “Water resistant” (IP65/IP67) is not equivalent to “waterproof” for permanent submersion; only IP68 is rated for continuous underwater use per IEC 60529 global standards. Note: IEC 60529 commonly tests IPX7 at 1 m for 30 minutes; IPX8 depth and duration are specified by the manufacturer.

6. Digital LED Display Panel Terminology

Display processing

This is simply the technical term for the process by which the digital sign takes a digital image and converts it into a visible display on the sign.

Full motion display processing

Digital signage displays, which are capable of video playback, utilize “full motion” display processing, meaning it can create smooth and seamless video.

Case Configuration

This describes what materials the LED’s case is made from, and other features such as how weather-resistant it is.

Pixel

A “pixel” is simply a single “dot” on the display that can be as small as one LED or it may contain a cluster of LEDs that act as a unit. An LED display is made up of an array of pixels.

Pixel Pitch

the distance from the center of one pixel to the center of the adjacent pixel. This is equivalent to a display’s resolution and is commonly measured in millimeters. The larger this number is, the more spacing there is between pixels which results in a lower resolution. The lower this number is, the more tightly the pixels are packed together resulting in a higher resolution.

Industry standard formula: Minimum viewing distance (in meters) ≈ pixel pitch (in mm) x 1. Comfortable viewing distance ≈ pixel pitch x 1.5. Optimal viewing distance ≈ pixel pitch x 3. For example, a P10 (10mm pixel pitch) display is best viewed from 30 meters or further, making it ideal for highway billboards. Indoor retail and corporate displays typically use P2.5 to P5 pixel pitch for close-up viewing.

Color processing

How many colors a display is capable of. Most full-color displays can display more than 250 trillion shades.

Technical context: This color depth is typically achieved via 16-bit per channel processing, delivering 65,536 unique shades per primary color (red, green, blue) for smooth gradients and accurate color reproduction.

Operating Temp

LED displays can operate in a wide range of temperatures, generally from around -40°F up to around 120°F, allowing them to work in most environments.

Celsius equivalent & upgrade: This range converts to -40°C to 49°C. Industrial-grade LED displays can extend this range to -55°C to 70°C for extreme cold or high-heat industrial environments.

Optimal Viewing Angle

There is a point where a digital sign becomes too dim to see if you are too far to one side of it. When this happens, you are outside the Optimal Viewing Angle. The wider the OVA, the better for visibility.

Industry benchmark: Most commercial LED displays have a horizontal optimal viewing angle of 120–160 degrees and a vertical viewing angle of 60–120 degrees.

Software (Content Management Software)

Every digital sign requires computer software, which allows you to manage messages, pick graphics, and schedule message changeover times.

Full color LED display

A digital signage display that can display the full range of colors, by using a matrix of three colored subpixels that, when lit in different combinations and intensities, can create the full spectrum.

Frame rate (FPS)

The frame rate indicates how many times per second the image is updated. This is measured in frames per second, or FPS. The higher the FPS, the smoother the video appears.

Standard values: Most digital LED signage uses 30 FPS as the baseline for standard video playback. 60 FPS is required for high-speed motion content such as sports stadium displays and live event screens.

Brightness

The brightness of a LED display is measured in units called “nits.” One nit is roughly equivalent to a single burning candle. LED displays are capable of brightness measured in several thousands of nits.

Typical ranges: Indoor LED displays typically range from 500–2,000 nits, with 1,000 nits as the commercial retail standard. Outdoor sunlight-readable displays require 5,000–10,000 nits to maintain clear visibility in direct sunlight.

Monochrome LED display

A LED display that only displays one color, generally either red or amber, which are generally used for text-only displays.

7. Testing & Measurement Equipment

What is an Isocandela diagram?

Graphic representation of brightness distribution of a light source.

What is a Luminous Intensity Distribution Diagram?

It is a test to determine the beam angle of emitted light.

What is a goniophotometer?

A photometric device for testing the luminous intensity distribution, efficiency and luminous flux of luminaires.

Industry context: Goniophotometer testing is required to generate official LM-79 and LM-80 performance reports, which are the global standard for commercial LED product certification and performance validation.

8. LED Display Specification Quick Reference Cheat Sheet

This reference table compiles 2025 industry standard values for common LED display parameters, for quick at-a-glance specification comparison:

Parameter CategoryCommon Commercial RangeStandard Application Benchmark
Indoor Display Brightness500–2,000 nits1,000 nits (retail / corporate standard)
Outdoor Display Brightness5,000–10,000 nits6,500 nits (sunlight-readable baseline)
Indoor Pixel PitchP1.2 – P10P2.5–P3 (close-view retail signage)
Outdoor Pixel PitchP5 – P32P10 (highway & roadside billboards)
Color Rendering (CRI)70 – 9880+ (standard commercial grade)
LED Luminous Efficacy100 – 190 lm/W130 lm/W (2025 industry baseline)
Standard DC Voltage12V / 24V DC24V (installations over 5 meters)
Video Frame Rate24 – 60 FPS30 FPS (standard digital signage)
Operating Temperature (Standard)-40°F to 120°F (-40°C to 49°C)Suitable for most commercial environments

9. 2026 LED Display Technology Updates

COB (Chip-on-Board)

COB places LED chips directly on the PCB and is common in fine-pitch indoor displays from P0.4 to P1.5. COB offers better protection, higher contrast, and improved reliability than traditional SMD in many indoor environments.

GOB (Glue-on-Board)

GOB adds a protective glue layer over the module. It is commonly used for rental, floor, and high-touch applications, and can reach IP65-level protection.

MIP (Micro LED in Package)

MIP is an emerging 2024–2026 technology for fine-pitch displays. It commonly targets P0.4–P1.0 and is positioned between COB and traditional Micro LED.

Mini LED and Micro LED

Mini LED is commonly used for pixel pitches around P0.4–P1.5. Micro LED is below approximately P0.1–P0.3 in advanced display applications, but it is not yet the mainstream choice for general LED signage.

Common Cathode Drive

Common cathode drive is a 2026 energy-saving trend. It can reduce power consumption by about 20–30% and lower heat.

HDR10, HLG, 5G, Cloud CMS, and AI Content Scheduling

HDR10, HLG, 5G, cloud CMS, and AI-assisted content scheduling are increasingly common in premium LED display signage.

Refresh Rate, Scan Mode, and Latency: 2026 Values

Refresh rate is measured in Hz. For indoor LED signs, 1,920 Hz is a common minimum. For camera-facing, broadcast, rental, and live-stream applications, 3,840 Hz or higher is preferred. High-end rental displays often use 7,680 Hz to reduce flicker and scan lines on camera.

Scan mode is commonly 1/8, 1/16, 1/32, or higher. A higher scan rate generally improves visual comfort and reduces flicker. Latency for modern LED display systems is typically under 1 frame, or under 16 ms at 60 FPS.

Gray Scale and Color Depth: 2026 Values

Most professional full-color LED displays use 14-bit to 16-bit gray scale. A 16-bit system provides 65,536 brightness levels per color channel. Combined RGB output can reach about 281 trillion colors. Many suppliers still describe this as “more than 250 trillion shades.”

HDR10 and HLG are increasingly supported on premium indoor and outdoor LED displays. For color-critical indoor work, look for 100% NTSC, 90%+ DCI-P3, or equivalent wide-gamut coverage.

10. Power, Heat, Lifespan, and Maintenance: 2026 Industry Values

Typical LED display power consumption is 100–250 W/m² average and 400–800 W/m² maximum. Common-cathode drive designs can reduce power consumption by about 20–30% compared with traditional drive designs. Power factor is typically above 0.9. Driver efficiency is commonly 85–95%.

Heat output is roughly 300–600 BTU/hr per square meter for many indoor displays, and higher for high-brightness outdoor displays. Proper ventilation or air conditioning is required for enclosed installations.

Front-service and rear-service access are both common. Front-service is preferred for wall-mounted signs with limited rear access.

Common LED display control systems include NovaStar, Colorlight, Linsn, and Huidu. Modern cloud CMS platforms support scheduled playback, remote monitoring, power reporting, brightness scheduling, and API integration. Connectivity commonly includes Ethernet, Wi-Fi, 4G, and 5G. Some systems support mobile app control and multi-site cloud management. Supported formats commonly include MP4, AVI, MOV, JPG, PNG, and GIF.

Extended 2026 Quick Reference

ApplicationTypical Pixel PitchTypical BrightnessTypical Refresh RateTypical IP RatingViewing Distance
Indoor close-up / conferenceP0.9–P2.5600–1,200 nits1,920–3,840 HzIP40–IP54Min: pitch × 1 m; Optimal: pitch × 3 m
Indoor retail / lobbyP1.5–P3800–1,500 nits1,920–3,840 HzIP40–IP54P2.5: 2.5 m min, 7.5 m optimal
Window-facing indoorP2–P42,500–4,000 nits1,920–3,840 HzIP54–IP65P3: 3 m min, 9 m optimal
Semi-outdoorP3–P6.673,000–5,500 nits1,920–3,840 HzIP65P5: 5 m min, 15 m optimal
Outdoor commercialP4–P105,000–10,000 nits1,920–3,840 HzIP65–IP67P8: 8 m min, 24 m optimal
Digital billboardP8–P166,000–12,000 nits1,920–3,840 HzIP65–IP68P10: 10 m min, 30 m optimal
Rental / stageP2.6–P4.84,000–6,000 nits3,840–7,680 HzIP65P3.9: 3.9 m min, 11.7 m optimal